Driving state technical parameters |
||
| Category | Item | Parameter |
| Dimension parameter | total length(mm) | 5995 |
| total width(mm) | 2100 | |
| total height(mm) | 2810 | |
| Wheelbase(mm) | 2800 | |
| Front overhang (mm) | 1070 | |
| Rear overhang (mm) | 1520 | |
| Quality parameters | Gross vehicle weight (kg) | 4995 |
| Driving parameters | Maximum driving speed (km/h) | 100 |
| Minimum ground clearance | – | |
| Approach angle (°) | 20 | |
| Departure angle (°) | 19 | |
Main technical parameters of operation |
|
| Category | Item |
| Rated load of working platform (kg) | 200 |
| Maximum working height (m) | 32 |
| Working range at maximum working height (m) | 3 |
| Maximum working range (m) | Single: 21; Double: 18 |
| Working height at maximum working range (m) | 24 |
| Leg span/longitudinal (mm) | 5900 |
| Leg span/lateral (mm) | 6200 |
| Leg retraction time/retraction (s) | ≥60 |
| Leg deployment time/deployment (s) | 60 |
| Rotation speed (s/r) | 60 |
| Platform lifting time (s) | ≥120 |
| Platform lowering time (s) | ≥95 |
| Configuration description | ||
| Item | Parameter | |
| Chassis model | JX1041TCD26 | |
| Engine model | JX4D30B6H | |
| Drive form | 4×2 | |
| Cab | Single-row seat, accommodating 2 people, with heating and cooling air conditioning. | |
| Boom | Boom form | Eight-section sixteen-sided working boom, synchronous telescoping. |
| Material | High-strength steel 3mm – 4mm | |
| Boom section | Hexadecagon | |
| Luffing | Double cylinder luffing | |
| Undulating angle | 0° – 78° (relative to horizontal plane) | |
| Safety device | Limit indicator light | |
| Support legs | Support leg form | Front and rear X-shaped, horizontal two sections. |
| Support leg material | High-strength steel / 4mm – 5mm. | |
| Support leg span | Longitudinal 5900mm, lateral 6200mm. | |
| Hydraulic lock | Four support legs all have two-way hydraulic locks. | |
| Support leg safety devices | Detection switch, alarm indicator light, buzzer, level gauge. | |
| Support leg strobe light | Yellow: four in total at front and rear. | |
| Working platform | Material | high-quality aluminum alloy, anti-slip checkered aluminum plate |
| side and rear protection | There are two toolboxes on each side. | |
| Turntable | vertical boom | Composed of high-strength steel splicing. |
| slewing bearing | Xuzhou Manyue horizontal slewing. | |
| Rotation | Rotation 360° left and right. | |
| Reducer | One reducer. | |
| Hydraulic motor | 1 | |
| suspended platform | Rated load | ≤200kg |
| Material | Anodized aluminum alloy square tube | |
| Leveling form | Static hydraulic automatic leveling | |
| Rotation | Electric 360° continuous rotation | |
| Safety belt | Two pairs | |
| Leveling device | Hydraulic cylinder leveling | |
| Hydraulic system | Hydraulic oil tank | 200L: with liquid level gauge. |
| Gear pump | Quantitative pump, flow rate 40ml/r. | |
| Working pressure | With pressure gauge: 20MPa. | |
| Hydraulic valve group | Electro-hydraulic proportional valve group, with manual emergency button. | |
| Emergency pump | Electric emergency pump. | |
| Oil cylinder | 3: two-way balance or pressure check valve to ensure safety. | |
| operating system | Support legs | Manual operation. Each support leg can be adjusted independently. There is interlock between getting on and off the vehicle. |
| Operation mode | Electric control and wireless remote control. | |
| Boom action | Turntable-mounted operation room with comfortable seat operation and hanging basket wireless remote control operation. | |
| Engine start and shutdown | Dual-position operation at turntable and hanging basket. | |
| Engine throttle | Remote electronic throttle. | |
| Paint | Well-known brand paint. The color is smooth and the lines are beautiful. | |
| Markings and signs | Clear, eye-catching and permanent non-fading. | |
Excellent manufacturing process
① Whole vehicle powder spraying process
Through processes such as shot blasting, electrostatic spraying, high – temperature curing, and cooling, a hard coating film is formed on the vehicle body, with higher wear – resistance and anti – corrosion properties.
② High standard welding process
The boom adopts three dimensional flexible welding technology, with dense welding seams, beautiful formation, and no slag on the surface.
At the same time, the double – sided boring, milling, and planning process is used to improve the smoothness and integrity of the boom, and the high – precision processing and installation are seamless.
③ Assembly process
The torque of all bolts is measured by torque wrenches, effectively improving the reliability of component connections and enhancing anti – loosening ability.
Perfect safety devices
① Automatic interlocking device for getting off:
Prevent danger caused by incorrect operation.
② Second level safety early warning device:
When the vehicle has a virtual leg, the system will automatically issue a safety hazard alarm.
③ Horizontal detection function:
Detect the horizontal state of the entire vehicle in real time to ensure that the vehicle is always level.
④ Emergency braking system:
In case of sudden accidents, operations can be stopped urgently, improving operation safety in complex environments.
⑤ Manual emergency pump:
When the main pump of the main engine fails, the manual emergency pump will be activated to safely send the workers to the ground and retract the entire vehicle to the driving state.
⑥ Nighttime safety warning devices:
Each outrigger is equipped with an engineering strobe light to constantly remind passersby to keep away. In addition, it is also equipped with lighting lamps to facilitate operations at night.
